LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1979 >> Luv 4WD, Standard Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> Wheel Alignment (Procedures) >> LUV >> Adjustment >> Torsion Bar Spring Height

Torsion Bar Spring Height

  1. Park vehicle on level surface. Jounce vehicle several times and allow vehicle to return to settled position.
  2. On 2 wheel drive vehicles, measure buffer clearance between rubber bumper and lower control arm. Using bolt located on height control arm, adjust buffer clearance to about 0.866" (22 mm).
  3. On all models, turn adjuster bolt on torsion bar until riding height measurement is to specifications.
    NOTE: Rotating bolt inward increases vehicle height.
scientia non olet · About LEMON Manuals