LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1978 >> Luv RWD, Standard Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> Wheel Alignment (Procedures) >> LUV >> Adjustment >> Torsion Bar Spring

Torsion Bar Spring

  1. Park vehicle on level surface. Jounce vehicle several times and allow to return to settled position.
  2. Measure buffer clearance between rubber bumper and lower control arm. Using bolt located on height control arm, adjust buffer clearance to about 0.866" (22 mm).
    NOTE: Rotating bolt inward increases vehicle height.
scientia non olet · About LEMON Manuals