LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1976 >> Chevette Base, Standard Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Windshield Wipers - Modified Pulse System >> Wiper System Testing >> Wiper Will Not Delay Between Wipes Dash Switch In Delay Mode

Wiper Will Not Delay Between Wipes Dash Switch In Delay Mode

  1. With ignition "ON" and dash switch in mid-delay position, remove connector from No. 6 and 7 terminals, then reinstall connector so it misses No. 6 terminal. If wiper still will not delay, see step 2)  . If wiper operates correctly, check for grounded wire between No. 6 terminal and dash switch. If no ground is apparent, replace dash switch.
  2. Remove washer pump cover and reinstall wiring. With ignition "ON" and dash switch in mid-delay position, disconnect Yellow wire from pulse relay. If wiper will not delay, replace pulse relay. If wiper fails to operate, replace timing device.