Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Pull away a segment of the front side door weather-strip to clear the edge of the instrument panel fuse block access hole cover (1).
Using a flat-bladed plastic trim tool, release the retaining clips.
Instrument Panel Fuse Block Access Hole Cover (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Hood Primary Latch Release Cable Handle (1) - Release
Instrument Panel Knee Bolster Bolt (2) - Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Knee Bolster (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Instrument Panel Trim Pad (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Switch Trim Plate Bolt (1) - Remove [2x]
Disconnect the electrical connectors.
Instrument Panel Switch Trim Plate (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Release the retaining tabs.
Ride Control Switch (1) - Remove