Installation Procedure
Using the mechanics wire, guide the oil pump flow control solenoid valve harness (3) into place, then remove the wire.
- Oil Pump Flow Control Solenoid Valve Harness Bolt (2) - Install and tighten to 15 N.m (11 lb ft)
- Engine Wiring Harness (1) - Connect
- Front Compartment Splash Shield - Right Side - Install - Front Compartment Splash Shield Replacement
Oil Pump Flow Control Solenoid Valve Harness (1) @ Crankshaft Oil Deflector (2) - Install
Oil Pump Flow Control Solenoid Valve Harness (1) @ Retainer (2) - Install
Oil Pump Flow Control Solenoid Valve Harness (1) @ Oil Pump Flow Control Solenoid Valve (2) - Connect
- Lower Oil Pan - Install - Lower Oil Pan Replacement
CAUTION:
Refer to Fastener Caution .