Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Install the generator (1) along with the lower generator mounting bolt (2).
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution

Generator Bolt (2) - Install and tighten 22 N.m (16 lb ft)
Generator Bolt (1) - Install and tighten 22 N.m (16 lb ft)
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Intake manifold is transparent.

Auxiliary Generator Battery Jumper Cable (2) - Install
Battery Positive Cable Nut (1) @Generator - Install and tighten 15 N.m (11 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Electrical Connector (1) - Connect
Courtesy of GENERAL MOTORS COMPANY

Charge Air Cooler Outlet Air Tube (2) @Throttle Body - Install - Charge Air Cooler Outlet Air Tube Replacement
Courtesy of GENERAL MOTORS COMPANY

Intake Manifold Cover (1) - Install - Intake Manifold Cover Replacement
Courtesy of GENERAL MOTORS COMPANY

Accessory Drive Primary Belt (1) - Install - Accessory Drive Primary Belt Replacement
Connect the battery negative cable. Battery Negative Cable Disconnection and Connection