Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Fuel Feed Intermediate Pipe (2) - Install NEW

CAUTION:

Fuel Injection Fuel Feed Pipe Bracket Bolt (1) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Nut @ Fuel Feed Intermediate Pipe (1) - Tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Radiator Surge Tank Inlet Hose Clip (2) @ Upper Intake Manifold Bracket (3) - Install
Courtesy of GENERAL MOTORS COMPANY

Intake Manifold Cover Insulator (2) - Install
Intake Manifold Cover Bolt (1) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Install
Courtesy of GENERAL MOTORS COMPANY

Push down on the front of the intake manifold cover (2).
Intake Manifold Cover Bolt (1) - Install and tighten [2x] - Fastener Specifications
Install the oil fill cap.
Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
Pressurize the fuel system and inspect for leaks.