Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Battery Cable Terminal Bolt | 9 N.m (80 lb in) |
| Battery Hold Down Bolt | 22 N.m (16 lb ft) |
| Battery Hold Down Strap Bolt | 9 N.m (80 lb in) |
| Battery Negative Cable Bolt@Rear Bumper Impact Bar Bracket | 22 N.m (16 lb ft) |
| Battery Negative Cable Ground Bolt@Front End Upper Tie Bar Extension | 22 N.m (16 lb ft) |
| Battery Negative Cable Nut@Battery Monitor Module | 9 N.m (80 lb in) |
| Battery Negative Cable Nut@Starter Stud (LSY) | 22 N.m (16 lb ft) |
| Battery Positive Cable Nut@Engine Wiring Harness Fuse Block Bracket | 15 N.m (11 lb ft) |
| Battery Positive Cable Nut@Generator (LSY) | 15 N.m (11 lb ft) |
| Battery Positive Cable Nut@Starter Solenoid (LGY) | 12.5 N.m (111 lb in) |
| Battery Positive Cable Nut@Starter Solenoid (LSY) | 15 N.m (11 lb ft) |
| Battery Post Negative Cable Clamp Nut | 4.5 N.m (40 lb in) |
| Engine Wiring Harness Generator Lead Nut (LGY) | 15 N.m (11 lb ft) |
| Engine Wiring Harness Junction Block Bolt | 9 N.m (80 lb in) |
| Generator Bolt (LGY) | 25 N.m (18 lb ft) |
| Generator Bolt (LSY) | 22 N.m (16 lb ft) |
| Multifunction Power Supply Converter Bracket Bolt | 9 N.m (80 lb in) |
| Starter Bolt (LGY, LSY) | 58 N.m (43 lb ft) |
| Starter Bolt (LT4) | 50 N.m (37 lb ft) |
| Starter Heat Shield Bolt (LGY, LT4) | 9 N.m (80 lb in) |
| Starter Solenoid Cable Nut | 12.5 N.m (111 lb in) |
| Starter Stud (LSY) | 58 N.m (43 lb ft) |