Removal Procedure
WARNING: This page is about a different car, the 2023 GMC Sierra 3500 HD and 2023 GMC Sierra 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Prepare the brake system control module for removal. Control Module References
- Front Wheelhouse Liner - Remove - Front Wheelhouse Liner Replacement
- Clean the area surrounding the electronic brake control module (EBCM) and brake pressure modulator valve (BPMV) assembly of any accumulated dirt and debris.
Brake Pressure Modulator Valve Pipe Clip (1) - Release
- Brake Pressure Modulator Valve Front Pipe Nut (2) - Remove [2x]
- Brake Pressure Modulator Valve Pipe (3) @Brake Pressure Modulator Valve - Position aside [2x]
Front Brake Front Pipe Nut (1) @Brake Pressure Modulator Valve - Remove [4x]
- Front Brake Intermediate Pipe (2) @Brake Pressure Modulator Valve - Position aside [4x]
Disconnect the EBCM electrical connector (1).
- Brake Pressure Modulator Valve Bracket Bolt (2) - Remove [3x]
Brake Pressure Modulator Valve (1) - Remove
Brake Pressure Modulator Valve Bolt (1) - Remove
- Brake Pressure Modulator Valve Bracket (2) - Remove