Circuit/System Testing
WARNING: This page is about a different car, the 2023 GMC Sierra 3500 HD and 2023 GMC Sierra 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify that C0500-C0504, C0506-C0510, C0512-C0516, C050A, or C050C-C050F is not set in the EBCM.
- If any listed DTC is set
Refer to DTC C0500-C0504, C0506-C0510, C0512-C0516, C050A, or C050C-C050F to diagnose that DTC prior to this diagnostic.
- Go to next step: If any listed DTC is not set
- If any listed DTC is set
- Replace the K17 Electronic Brake Control Module.
- Verify the DTC does not set while operating the vehicle under the Conditions for Running the DTC.
- If the DTC sets
Replace the module that set the DTC.
- Go to next step: If the DTC does not set
- If the DTC sets
- All OK.