Removal Procedure
WARNING: This page is about a different car, the 2021 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation
Front Lower Control Arm Ball Stud Nut (1) - Loosen
Use the CH-42188-B Ball Joint Separator (1) to separate the front lower control arm from the steering knuckle.
- Front Lower Control Arm Ball Stud Nut (2) - Remove
Front Lower Control Arm Front Bolt (1) - Remove and DISCARD [ 2x ]
Front Lower Control Arm Rear Nut (1) - Remove [ 2x ]
- Front Lower Control Arm Rear Bolt (2) - Remove and DISCARD [ 2x ]
Remove the front lower control arm (1) from the vehicle.