Fastener Specifications
WARNING: This page is about a different car, the 2020 Cadillac XT5. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Pressure Modulator Valve Bolt | 11 N.m (97 lb in) |
| Brake Pressure Modulator Valve Bracket Bolt | 22 N.m (16 lb ft) |
| Electronic Brake Control Module Bolt Refer to procedure for tightening sequence and torque values. |
Electronic Brake Control Module Replacement |
| Left Front Brake Pipe Fitting | 18 N.m (13 lb ft) |
| Left Rear Brake Pipe Fitting | 18 N.m (13 lb ft) |
| Right Front Brake Pipe Fitting | 18 N.m (13 lb ft) |
| Right Rear Brake Pipe Fitting | 18 N.m (13 lb ft) |
| Vehicle Stability Control System Switch Fastener | 2.5 N.m (22 lb in) |
| Wheel Speed Sensor Bolt | 9 N.m (80 lb in) |