Installation Procedure
WARNING: This page is about a different car, the 2021 GMC Sierra 3500 HD and 2021 GMC Sierra 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Apply a light coat of wheel speed anti-corrosion grease to the front wheel speed sensor and mounting pad on the front steering knuckle. Adhesives, Fluids, Lubricants, and Sealers
- Front Wheel Speed Sensor(1) - Install
Retainer(4) - Secure
- Connect the brake pad wear sensor electrical connector (3).
- Front Wheel Speed Sensor Retainer (2) - Secure [ 3x ]
- Front Wheel Speed Sensor Bolt (1) - Install and tighten 9 N.m (80 lb in)
- CAUTION:
Front Wheel Speed Sensor Bolt (3) @ Bracket - Install and tighten [ 2x ] 9 N.m (80 lb in)
- Retainer(2) - Secure [ 2x ]
- Connect the front wheel speed sensor and brake pad wear sensor electrical connectors (1).
- Install the tire and wheel assembly. Tire and Wheel Removal and Installation (Front with Dual Wheels)Tire and Wheel Removal and Installation (Rear with Dual Wheels)Tire and Wheel Removal and Installation (with Single Wheels)
- Remove the support and lower the vehicle.