Front Compartment Splash Shield Replacement

WARNING: This page is about a different car, the 2020 Cadillac XT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation Disconnect the front suspension 4 corner leveling system position sensor electrical connector and the wire harness retaining clips at splash shield, if equipped. Front Suspension 4 Corner Leveling System Position Sensor Replacement
1	Front Compartment Splash Shield Bolt [4x] CAUTION: Refer to Fastener Caution Tighten 2.5 N.m (22 lb in)
2	Front Compartment Splash Shield

Callout

Component Name

Preliminary Procedures

Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation
Disconnect the front suspension 4 corner leveling system position sensor electrical connector and the wire harness retaining clips at splash shield, if equipped. Front Suspension 4 Corner Leveling System Position Sensor Replacement

Front Compartment Splash Shield Bolt [4x]

CAUTION:

Refer to Fastener Caution

Tighten
2.5 N.m (22 lb in)

Front Compartment Splash Shield