LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> XT5 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Secondary And Configurable Customer Controls) >> Diagnostic Information and Procedures >> Drive Mode Switch Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2020 Cadillac XT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On/Vehicle - In Service Mode
  2. Operate the component: S126 Drive Mode Select Switch - Rotate Left & Rotate Right

    Verify the following information is correctly displayed: Drive Mode @ A5 Driver Information Center

    • If the component does not work as specified 

      Refer to Circuit/System Testing - Test 1

    • Go to next step: If the component works as specified 
  3. Operate the component: S126 Drive Mode Select Switch - Rotate Left & Rotate Right

    Verify the following information is correctly displayed: Drive Mode - LED (Light Emitting Diode) @ S126 Drive Mode Select Switch

    • If the component does not work as specified 

      Refer to Circuit/System Testing - Test 2

    • Go to next step: If the component works as specified 
  4. All OK.
scientia non olet · About LEMON Manuals