Installation Procedure
Windshield (2) - Install - Adhesive Installation of Windshields
Inside Air Moisture and Windshield Temperature Sensor (1) - Install - Inside Air Moisture and Windshield Temperature Sensor Replacement
- Inside Rearview Mirror - Install - Inside Rearview Mirror Replacement
{If equipped} Front View Driver Information Camera Bracket (1) - Install - Front View Driver Information Camera Bracket Replacement
Air Inlet Grille Panel (2) - Install - Air Inlet Grille Panel Replacement
- Remove the double layer of masking tape around the perimeter of the painted surfaces.
- Remove any remaining adhesive residue with a 50/50 mixture by volume of isopropyl alcohol and clean drinkable water. Wipe the surface dry with a clean lint-free towel.