LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT5 Sport, RWD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Specifications >> Fastener Specifications

Fastener Specifications

Single Use Threaded Fastener/Component Tightening Specifications

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 

Application Specification
Metric (English)
Rear Suspension Cradle Rear Bolt
  • First Pass:
100 N.m (74 lb ft)
  • Final Pass:
90 to 105 Degrees
Reusable Threaded Fastener Tightening Specifications

NOTE:

All fasteners listed in this table can be reused after removal. 

Application Specification
Metric (English)
Drivetrain and Front Suspension Cradle Front Bolt 105 N.m (77 lb ft)
Drivetrain and Front Suspension Cradle Rear Bolt 100 N.m (74 lb ft)
Engine Front Splash Shield Bolt 2.5 N.m (22 lb in)
Floor Panel Number 2 Cross Bar Reinforcement Bolt 22 N.m (16 lb ft)
Floor Panel Tunnel Panel Front Brace Bolt 22 N.m (16 lb ft)
Front Bumper Fascia Air Deflector Bolt 9 N.m (80 lb in)
Front Compartment Air Deflector Bolt 5 N.m (44 lb in)
Front Tire Front Air Deflector Bolt 2.5 N.m (22 lb in)
Front Wheelhouse Liner Bolt 2.5 N.m (22 lb in)
Front Crossmember Brace Bolt 50 N.m (37 lb ft)
Front Crossmember Brace Nut 50 N.m (37 lb ft)
Rear Tire Front Air Deflector Fastener 2.5 N.m (22 lb in)
Rear Wheelhouse Liner Bolt 2.5 N.m (22 lb in)
Underbody Front Air Deflector Bolt 5 N.m (44 lb in)
Underbody Front Air Deflector Nut 5 N.m (44 lb in)
Underbody Rear Air Deflector Bolt 5 N.m (44 lb in)
Underbody Rear Air Deflector Nut 5 N.m (44 lb in)