Installation Procedure
Windshield (1) - Install - Adhesive Installation of Windshields
- Windshield Outside Moisture/Ambient Light and Humidity Sensor - Install - Windshield Outside Moisture/Ambient Light and Humidity Sensor Replacement (with CE1)
- Front View Camera - Install - Front View Camera Replacement
Air Inlet Grille Panel (2) - Install - Air Inlet Grille Panel Replacement
- Remove the double layer of masking tape around the perimeter of the painted surfaces.
- Remove any remaining adhesive residue with a 50/50 mixture by volume of isopropyl alcohol and clean drinkable water. Wipe the surface dry with a clean lint-free towel.