LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Outlets >> Repair Instructions >> Wireless Charging System Module Replacement (MQA) >> Removal Procedure

Removal Procedure

  1. GM5479957Courtesy of GENERAL MOTORS COMPANY

    Reposition the seat as necessary to access the retaining clips.

  2. Using a flat-bladed plastic trim tool, release the retaining clips.
  3. Front Floor Console Extension Panel - Left Side (1) - Remove
  4. GM5479956Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, release the retaining clips.

  5. Front Floor Console Extension Panel - Right Side (1) - Remove
  6. GM5482680Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Bolt (1) - Remove [6x]

  7. Front Floor Console Bracket Bolt (2) - Remove [2x]
  8. Release the tabs (3) on both sides of the front floor console.
  9. GM5643539Courtesy of GENERAL MOTORS COMPANY

    Disconnect the front floor console harness connector (1).

  10. GM5482681Courtesy of GENERAL MOTORS COMPANY

    Slide the front floor console (1) enough to clear the instrument panel lower center trim panel.

  11. GM5502705Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Variable 1 Liner (1) - Remove

  12. Front Floor Console Trim Plate Bolt (2) - Remove [2x]
  13. GM5502706Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Trim Plate (1) - Remove

  14. Disconnect the electrical connector.
  15. GM5488339Courtesy of GENERAL MOTORS COMPANY

    Wireless Charging System Module Bolt (1) - Remove [4x]

  16. Wireless Charging System Module (2) - Remove
  17. Disconnect the electrical connector.
scientia non olet · About LEMON Manuals