Windshield Multifunction Sensor Mount Bracket Cover Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 GMC Yukon XL, 2020 GMC Yukon, 2020 Chevrolet Tahoe, 2020 Chevrolet Suburban, and 2020 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Windshield Multifunction Sensor Mount Bracket Cover WARNING: While operating, electrical control modules can produce heat and become hotter than their surroundings. To prevent burns allow sufficient time for the module to cool before removal. Procedures Using a plastic trim tool, carefully pry downward on the cover to gain access to the mirror. Remove the windshield multifunction sensor mount bracket cover insert. Refer to Windshield Multifunction Sensor Mount Bracket Cover Insert Replacement . Pull downward to completely remove cover from windshield. NOTE: The windshield multifunction sensor mount bracket cover and cover insert has to be removed as a single unit to prevent damage to mirror.

Callout

Component Name

Windshield Multifunction Sensor Mount Bracket Cover

WARNING:

While operating, electrical control modules can produce heat and become hotter than their surroundings. To prevent burns allow sufficient time for the module to cool before removal.

Procedures

Using a plastic trim tool, carefully pry downward on the cover to gain access to the mirror.
Remove the windshield multifunction sensor mount bracket cover insert. Refer to Windshield Multifunction Sensor Mount Bracket Cover Insert Replacement .
Pull downward to completely remove cover from windshield.

NOTE:

The windshield multifunction sensor mount bracket cover and cover insert has to be removed as a single unit to prevent damage to mirror.