Forward Range Radar Module Replacement (Chevrolet, GMC)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 GMC Yukon XL, 2020 GMC Yukon, 2020 Chevrolet Tahoe, 2020 Chevrolet Suburban, and 2020 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (GMC) , or Front Bumper Fascia Replacement (Chevrolet) . If replacing the forward range radar module bracket, remove the front bumper impact bar. Refer to Front Bumper Impact Bar Replacement (GMC) , or Front Bumper Impact Bar Replacement (Chevrolet) .
1	Forward Range Radar Module Fastener CAUTION: Refer to Fastener Caution .
2	Forward Range Radar Module Fasteners (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 85 N.m (63 lb ft)
3	Forward Range Radar Module Bracket NOTE: The forward range radar module bracket does not require removal to replace the module. Inspect the bracket for damage and replace as required.
4	Forward Range Radar Module Procedure Disconnect the electrical connector. Remove the module beginning with the lower ball socket. Carefully lift the module away from bracket using the appropriate tool. Align the forward range radar module. Refer to Forward Range Radar Module Alignment (Chevrolet, GMC) . For programming and set up, refer to Control Module References .