LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2020 >> XT6 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Battery, Starting System And Charging System) >> Repair Instructions >> Battery Negative Cable Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 GMC Yukon XL, 2020 GMC Yukon, 2020 Chevrolet Tahoe, 2020 Chevrolet Suburban, and 2020 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4852683Courtesy of GENERAL MOTORS COMPANY

    Battery Negative Cable (3) - Install

  2. CAUTION:

    Refer to Fastener Caution

  3. Battery Negative Cable Ground Bolt (1) - Install and tighten 45 N.m (33 lb ft)
  4. Retainer (2) - Engage
  5. GM4852677Courtesy of GENERAL MOTORS COMPANY

    Battery Negative Cable Ground Bolt (2) - Install and tighten 9 N.m (80 lb in)

  6. Retainer (1) - Engage [4x]
  7. Install the right front wheelhouse liner. Front Wheelhouse Liner Replacement - Right Side (Cadillac) , or Front Wheelhouse Liner Replacement - Right Side (Chevrolet) , or Front Wheelhouse Liner Replacement - Right Side (GMC)
  8. GM4852416Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector (1)@Battery Current Sensor (3) - Connect

  9. Retainer (2) - Engage
  10. Connect the negative battery cable. Battery Negative Cable Disconnection and Connection (Dual Battery) , or Battery Negative Cable Disconnection and Connection (Single Battery)