Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 GMC Yukon XL, 2020 GMC Yukon, 2020 Chevrolet Tahoe, 2020 Chevrolet Suburban, and 2020 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.
Inspect the EBCM to BPMV gasket for damage and replace, if necessary.
Install the EBCM (1) to the BPMV.
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

NOTE:
A new EBCM may not have threaded inserts. Refer to the Electronic Parts Catalog and use new self tapping fasteners to form the threads.

Install the EBCM bolts (1) and tighten in a cross pattern to 3 N.m (27 lb in).
Connect the EBCM electrical connector.
Program the EBCM. Control Module References