LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2020 >> XT6 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Antilock Brake System) >> Diagnostic Information and Procedures >> Traction Control/Stability Control Indicator Malfunction >> Component Testing

Component Testing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 GMC Yukon XL, 2020 GMC Yukon, 2020 Chevrolet Tahoe, 2020 Chevrolet Suburban, and 2020 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the appropriate S48 Multifunction Switch.
  2. Test for infinite resistance between the signal terminal and the ground terminal with the switch in the open position.
    • If less than infinite resistance 

      Replace the appropriate S48 Multifunction Switch.

    • Go to next step: If infinite resistance 
  3. Test for less than 2 Ω between the signal terminal and the ground terminal with the switch in the closed position.
    • If 2 Ω or greater 

      Replace the appropriate S48 Multifunction Switch.

    • Go to next step: If less than 2 Ω 
  4. All OK.
scientia non olet · About LEMON Manuals