Folding 3rd Row Seat Module Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 GMC Yukon XL, 2020 GMC Yukon, 2020 Chevrolet Tahoe, 2020 Chevrolet Suburban, and 2020 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Fold the 3rd row 60% seat forward. Remove the rear compartment floor stowage trim compartment. Refer to Rear Compartment Floor Stowage Trim Compartment Replacement (Standard Wheelbase) , or Rear Compartment Floor Stowage Trim Compartment Replacement (Extended Wheelbase) .
1	Folding 3rd Row Seat Module Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Folding 3rd Row Seat Module Procedure Disconnect the electrical connectors. After the installation is complete, perform the Diagnostic System Check - Vehicle .

Callout

Component Name

Preliminary Procedures

Fold the 3rd row 60% seat forward.
Remove the rear compartment floor stowage trim compartment. Refer to Rear Compartment Floor Stowage Trim Compartment Replacement (Standard Wheelbase) , or Rear Compartment Floor Stowage Trim Compartment Replacement (Extended Wheelbase) .

Folding 3rd Row Seat Module Screw (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Folding 3rd Row Seat Module

Procedure

Disconnect the electrical connectors.
After the installation is complete, perform the Diagnostic System Check - Vehicle .