Component Testing
WARNING: This page is about a different car, the 2023 GMC Hummer EV. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the A22 Radio Control.
- Test for infinite resistance between the signal terminal 10 and the ground terminal 1 with the switch in the open position.
- If less than infinite resistance
Replace the A22 Radio Control.
- Go to next step: If infinite resistance
- If less than infinite resistance
- Test for less than 2 Ω between the signal circuit terminal 10 and the ground terminal 1 with the switch in the closed position.
- If 2 Ω or greater
Replace the A22 Radio Control.
- Go to next step: If less than 2 Ω
- If 2 Ω or greater
- All OK.