LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2020 >> XT6 Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 334 (Driver Assistance Systems - Repair Instructions) >> Repair Instructions >> Automated Driving Mapping Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2023 GMC Hummer EV. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5787901Courtesy of GENERAL MOTORS COMPANY

    Remove the left front floor mat (1).

  2. GM5776100Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use a flat bladed plastic trim tool.

    Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Remove

  3. Front Floor Console Extension Bolt (2) - Remove
  4. GM5776101Courtesy of GENERAL MOTORS COMPANY

    Move the front seat to access the retainers.

  5. Use a flat blade plastic trim tool to release the front floor console extension panel (1) retainers.
  6. Front Floor Console Extension Panel - Left Side (1) - Remove
  7. GM5787973Courtesy of GENERAL MOTORS COMPANY

    Floor Front Air Outlet Duct Bolt (1) - Remove

  8. GM5787975Courtesy of GENERAL MOTORS COMPANY

    Floor Front Air Outlet Duct Bolt (1) - Remove

  9. GM5787976Courtesy of GENERAL MOTORS COMPANY

    Floor Front Air Outlet Duct - Left Side (1) - Remove

  10. GM5778937Courtesy of GENERAL MOTORS COMPANY

    Disconnect the electrical connectors.

  11. Release the retaining tabs.
  12. Automated Driving Mapping Module (1) - Remove