Installation Procedure
WARNING: This page is about a different car, the 2023 GMC Hummer EV. However, it is still accessible from the selected car via links, so may be relevant.
Connect the electrical connectors.
- Restraints Control Module (2) - Install
- Airbag Sensing and Diagnostic Module Nut (1) - Install and tighten [3x] - Fastener Specifications
Maneuver the floor rear air distributor (1) into the front floor console rear air duct (3) to install.
Install the front floor console rear air duct (1) into the floor rear air distributor (2).
- Maneuver the front floor console rear air duct (1) into the auxiliary blower motor (3) and install the duct.
Wiring Harness Retainer (2) - Install
- Connect the electrical connector. (1)
Floor Rear Air Distributor Bracket Nut (1) - Install and tighten [2x] - Fastener Specifications
Floor Front Air Outlet Duct Retainer (1) - Install
Front Floor Console - Install - Front Floor Console Removal and Installation
- Enable the SIR System. SIR Disabling and Enabling .
- Perform the necessary programming and setup procedure: Control Module References
CAUTION:
Refer to Fastener Caution .