Removal Procedure

WARNING: This page is about a different car, the 2023 GMC Hummer EV. However, it is still accessible from the selected car via links, so may be relevant.

Disable the SIR system. SIR Disabling and Enabling
Courtesy of GENERAL MOTORS COMPANY

With the aid of an assistant, remove the fascia. (1) Front Bumper Fascia Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Front Bumper Shutter Bolt (1)- Left Side and Right Side - Remove [4x]
Hood Front Bumper Bracket Support- Left Side and Right Side (2) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Shutter Bolt (1) - Remove [6x]
Disconnect the electrical connector.
Front Bumper Shutter (2) - Remove
Courtesy of GENERAL MOTORS COMPANY
NOTE:
- Integral sensor assembly bolt uses Left Hand threads. Use counterclockwise rotation to loosen fastener at TORX® tip end. If accessing at pan head end of the fastener, use clockwise rotation to loosen bolt.
- The bolts are integral to the sensor, DO NOT remove separately.
Loosen the fastener and slide the sensor out of the keyhole slot.
Disconnect the electrical connector.
Airbag Front End Discriminating Sensor (1) - Remove