Fastener Specifications
WARNING: This page is about a different car, the 2020 Cadillac CT6. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Side Door Inside Handle Fastener | 2.5 N.m (22 lb in) |
| Front Side Door Latch Bolt | 9 N.m (80 lb in) |
| Front Side Door Lock Striker Screw | 22 N.m (16 lb ft) |
| Front Side Door Outside Handle Bracket Screw | 4.7 N.m (42 lb in) |
| Front Side Door Outside Handle Insert Screw | 1.5 N.m (13 lb in) |
| Front Side Door Outside Handle Lock Cylinder Screw | 4 N.m (31 lb in) |
| Rear Compartment Lid Latch Bolt | 9 N.m (80 lb in) |
| Rear Compartment Lid Latch Striker Bolt | 9 N.m (80 lb in) |
| Rear Side Door Inside Handle Fastener | 2.5 N.m (22 lb in) |
| Rear Side Door Latch Bolt | 9 N.m (80 lb in) |
| Rear Side Door Lock Striker Screw | 22 N.m (16 lb ft) |
| Rear Side Door Outside Handle Bracket Screw | 4.7 N.m (42 lb in) |
| Rear Side Door Outside Handle Insert Screw | 1.5 N.m (13 lb in) |
| Rear Side Door Outside Handle Lock Cylinder Screw | 4 N.m (31 lb in) |