Rear Camber Adjustment
WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
Loosen the rear upper control arm bolt (1).
- Rotate the rear upper control arm bolt (1) until the proper camber setting is achieved. Wheel Alignment Specifications
- Verify the rear camber specifications and adjust as necessary.
- Tighten the rear suspension upper control arm nut (2). Upper Control Arm Replacement
CAUTION:
Refer to Fastener Caution .
NOTE:
Hold the rear suspension upper control arm bolt while tightening the rear suspension upper control arm nut.