Installation Procedure
Front Compartment Fuse Block (1) - Install
- CAUTION:
Refer to Fastener Caution .
Front Compartment Fuse Block Connector Bolt. (1) - Tighten [3x] 7.2N.m (64 lb in)
Front Compartment Fuse Block Cable Terminal and Nut (1) - Install and tighten 12N.m (106 lb in)
Power Steering Terminal and Terminal Nut (1) - Install and tighten 9N.m (80 lb in)
Front Compartment Fuse Block Cover(1) - Install
Fuse Block Side Cover(1) - Install
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection .