Installation Procedure
Install the wheel speed sensor (1) to the steering knuckle.
- CAUTION:
Refer to Fastener Caution .
Install the wheel speed sensor bolt (1) and tighten to 9 N.m (80 lb in).
Install the wheel speed sensor harness grommet (1) to the strut bracket.
Lock and connect the wheel speed sensor electrical connector (1).
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (With J64) , or Tire and Wheel Removal and Installation (With J55) .
- Perform the Diagnostic System Check - Vehicle .