Installation Procedure
Install the wheel speed sensor harness (1) to the steering knuckle.
- Connect the electrical connector and install the wheel speed sensor harness clip (2) to the steering knuckle bracket.
Install the wheel speed sensor harness clip (1) to the steering knuckle.
Install the wheel speed sensor to the wheel bearing and hub assembly.
- Install the wheel speed sensor bolt (1) and tighten to 9 N.m (80 lb in).
- Install the front brake rotor. Refer to Front Brake Rotor Replacement (J64) , or Front Brake Rotor Replacement (J55) .
- Install the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (With J64) , or Tire and Wheel Removal and Installation (With J55) .
- Perform the Diagnostic System Check - Vehicle .
CAUTION:
Refer to Fastener Caution .