Removal Procedure
- Remove the rear side door trim. Refer to Rear Side Door Trim Replacement .
- Remove the rear side door armrest plate bolts and plate from the inner door panel.
- Remove the rear side door water deflector.
- Disconnect the electrical connector (1) from the luminous reflecting light, if equipped
- Loosen the screw for the rear side door lock cylinder cover. Refer to Rear Side Door Lock Cylinder Opening Cover Replacement .
- Remove the rear side door outside handle (1) from the door as follows:
- Open the door handle fully.
- Slide the door handle rearward releasing the handle from the door handle bracket.
- Remove the rear side door outside handle and connector from the door.
NOTE:
When removing the door lock cylinder screw Do Not go past the hard stop.