Installation Procedure
WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Install the front floor console assembly (1) into the vehicle.
- Connect all electrical connectors.
- CAUTION:
Refer to Fastener Caution .
Front Floor Console Bolt (1) - Install and tighten [4x] 7 N.m (62 lb in)
Front Floor Console Bolt (1) - Install and tighten [4x] 7 N.m (62 lb in)
Connect the transmission range selector lever cable terminal (2) to the shift pin.
- Install the transmission range selector cable (1) to the transmission control base by pressing down until it seats into place.
- Instrument Panel Lower Center Trim Panel - Install - Instrument Panel Lower Center Trim Panel Replacement (Right Side) Instrument Panel Lower Center Trim Panel Replacement (Left Side)
- Front Floor Console Side Trim Panel - Left Side - Install - Front Floor Console Side Trim Panel Replacement - Left Side