Sunroof Frame Replacement
WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout |
Component Name |
|
Preliminary Procedures
- Remove the rear sunroof window. Refer to Sunroof Window Replacement (Front) Sunroof Window Replacement (Rear) .
- Remove the roof rail front assist handle bracket. Refer to Roof Rail Front Assist Handle Bracket Replacement
.
- Disconnect the sunroof harness electrical connectors.
- Disconnect the drain hoses from the sunroof frame. Refer to Sunroof Housing Front Drain Hose Replacement , and Sunroof Housing Rear Drain Hose Replacement .
Do not remove the drain hoses from the vehicle, disconnect the drain hoses at all the corners of the sunroof frame spigot only.
|
| 1 |
Sunroof Frame Side Bolt (Qty: 8)
Procedure
- Leave the two center bolts until last.
- Recline the seats all the way rearward.
- With an assistant, remove the sunroof frame from the vehicle and place it on a clean and dry prepared surface.
Tighten
9 N.m (80 lb in) |
| 2 |
Sunroof Frame Front Bolt (Qty: 4)
Tighten
9 N.m (80 lb in) |
| 3 |
Sunroof Frame Rear Bolt (Qty: 3)
Tighten
9 N.m (80 lb in) |
| 4 |
Sunroof Frame Procedure
- After the sunroof frame has been removed mark the motor to ensure proper locate for reinstalling. Refer to Sunroof Window Motor Replacement .
- Transfer all necessary components to the new sunroof frame assembly and reinstall to vehicle.
- Verify the sunroof motor initialization operation. Refer to Sunroof Window Motor Initialization .
- Water test vehicle before installing the trim to ensure No leaks.
|