Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Brake Pressure Modulator Valve Assembly (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Brake Pressure Modulator Valve Bracket Bolt (1) - Install and tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Brake Pressure Modulator Valve Bracket Bolt (1) - Install and tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Brake Pressure Modulator Valve Bracket Nut (1) - Install and tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Right Rear Brake Pipe Fitting (1) - Install and tighten 19 N.m (14 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Left Front Brake Pipe Fitting (1) - Install and tighten 19 N.m (14 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Right Front Brake Pipe Fitting (1) - Install and tighten 19 N.m (14 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Left Rear Brake Pipe Fitting (1) - Install and tighten 19 N.m (14 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Brake Pressure Modulator Valve Secondary Pipe Fitting (1) - Install and tighten 32 N.m (24 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Brake Pressure Modulator Valve Primary Pipe Fitting (1) - Install and tighten 32 N.m (24 lb ft)
Connect the EBCM electrical connector.
Bleed the brake system. Antilock Brake System Automated Bleed
Engine Wiring Harness Fuse Block Bracket - Install - Engine Wiring Harness Fuse Block Bracket Replacement (LGW, LGX, LSY)Engine Wiring Harness Fuse Block Bracket Replacement (LTA-Driver Side)Engine Wiring Harness Fuse Block Bracket Replacement (LTA-Passenger Side)
Program the EBCM. Control Module References
Center the steering angle sensor. Steering Wheel Angle Sensor Centering (without UKL) Steering Wheel Angle Sensor Centering (with UKL)