Inside Rearview Mirror Replacement

GM2019780

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedure
Remove the windshield multifunction sensor mount bracket cover. Refer to Windshield Multifunction Sensor Mount Bracket Cover Replacement (With UEU, UFL)Windshield Multifunction Sensor Mount Bracket Cover Replacement (Without UEU, UFL)

1

Inside Rearview Mirror Screw

CAUTION:

Refer to Fastener Caution .

Procedure

Remove the inside rearview mirror harness cover.
Disconnect the electrical connector.
Adjust the mirror to the full upward position.
Loosen the set screw located at the base of the mirror.

Tighten
2 N.m (18 lb in)

2

Inside Rearview Mirror
Procedure
Slide the mirror upward off of the rearview mirror button.