LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> ATS Base, AWD >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Vehicle Access System >> Diagnostic Information and Procedures >> DTC B3938 >> Component Testing

Component Testing

  1. Ignition/Vehicle - Off
  2. Disconnect the electrical connector: M97 Fuel Fill Door Lock Actuator
  3. Connect a 20 A fused jumper wire between the test points: Control terminal 1 & 12 V
    4. CAUTION:

    Complete the testing as quickly as possible in order to prevent overheating and damaging the component.

  4. Momentarily connect a jumper wire between the test points: Control terminal 2 & Ground

    Reverse the jumper wires 2 times between the terminals.

    Verify the component works as specified: M97 Fuel Fill Door Lock Actuator = Lock/Unlock

    • If not the specified state 

      Replace the component: M97 Fuel Fill Door Lock Actuator

    • Go to next step: If the specified state 
  5. All OK.
scientia non olet · About LEMON Manuals