Installation Procedure
Front Compartment Fuse Block (1) - Install
- CAUTION:
Refer to Fastener Caution .
Front Compartment Fuse Block Connector Bolt (1) - Tighten [3x] 7.2 N.m (64 lb in)
Front Compartment Fuse Block Cable Terminal and Nut (1) - Install and tighten to 12 N.m (106 lb in)
Power Steering Terminal and Terminal Nut (1) - Install and tighten to 9 N.m (80 lb in)
Front Compartment Fuse Block Cover (1) - Install
Fuse Block Side Cover (1) - Install
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection .