LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> XT5 Base, FWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection 
  2. Warm Up Three-Way Catalytic Converter- Bank 2 - Remove - Warm Up Three-Way Catalytic Converter Replacement (Bank 1, LGX)Warm Up Three-Way Catalytic Converter Replacement (Bank 2, LGX)
  3. GM4287567Courtesy of GENERAL MOTORS COMPANY

    Knock Sensor- Bank 2(1) - Remove - Knock Sensor Replacement - Bank 2

  4. GM4286549Courtesy of GENERAL MOTORS COMPANY

    Starter Heat Shield(2) - Remove - Starter Shield Replacement 

  5. GM4286416Courtesy of GENERAL MOTORS COMPANY

    Starter Solenoid Cable Nut(1) - Remove

  6. Battery Positive Cable Conduit Fastener - (3)Remove
  7. Battery Positive Cable(2) - Remove
  8. GM4287534Courtesy of GENERAL MOTORS COMPANY

    Starter Mounting Bolt(1) - Remove[2X]

  9. GM4287535Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector(1) - Disconnect

  10. Remove the starter.(2)
scientia non olet · About LEMON Manuals