LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, RWD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel And Steering Column >> Diagnostic Information And Procedures >> DTC B285A: Steering Column Position Module >> Component Testing >> Steering Column Tilt Motor Test

Steering Column Tilt Motor Test

  1. Ignition OFF, disconnect the X1 harness connector at the K99 Steering Column Position Control Module.
  2. Test for 1 - 2.5 Ω between terminal 1 and terminal 2.
    • If not within the specified range 

      Replace the M68 Steering Column Tilt Motor.

    • Go to next step: If within the specified range 
  3. All OK.
scientia non olet · About LEMON Manuals