LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> CTS Base, RWD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Transmission Support Replacement (AWD) >> Installation Procedure

Installation Procedure

  1. GM2908631

    Install the transmission support (3).

    2. CAUTION:

    Refer to Fastener Caution .

    NOTE:

    The engine mounts must NOT bend or deflect from the vertical position, damage to the mount will occur.

  2. Install the transmission support bolts (2) and tighten to 60 N.m (44 lb ft).
  3. Install the transmission travel mount bolt (1) and tighten to 100 N.m (74 lb ft).
  4. Remove the support from under the transmission.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals