LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> CTS Base, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LF3) >> Installation Procedure

Installation Procedure

  1. GM4924017Courtesy of GENERAL MOTORS COMPANY

    Generator (5) - Position

  2. Engine Wiring Harness Terminal (4) - Install
    3. CAUTION:

    Refer to Fastener Caution .

  3. Battery Positive Cable Nut (2) - Install and tighten to 15 N.m (11 lb ft)
  4. Protective Cap (1) - Install
  5. Electrical Connector (3) - Connect
  6. GM4924016Courtesy of GENERAL MOTORS COMPANY

    Generator (3) - Install

  7. Harness Bracket (2) - Install
  8. Generator Bolt (1) - Install and tighten [3x] to 58 N.m (43 lb ft)
  9. Install the drive belt. Drive Belt Replacement (LF3) .
  10. GM4887343Courtesy of GENERAL MOTORS COMPANY

    Power Brake Booster Pump (1) - Install - Power Brake Booster Pump Replacement

  11. GM3599736Courtesy of GENERAL MOTORS COMPANY

    Charge Air Cooler Coolant Pump (3) - Install - Charge Air Cooler Coolant Pump Replacement (LF3)

  12. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (without KL9) Battery Negative Cable Disconnection and Connection (with KL9) 
scientia non olet · About LEMON Manuals