Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Water Inlet (2)@High Voltage Battery Cover - Install

CAUTION:

Water Inlet Nut (1)@Water Inlet - Install and tighten [2x] 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Heater Vent Hose (1)@Water Inlet - Install
Courtesy of GENERAL MOTORS COMPANY

Engine Coolant Air Bleed Hose (2)@Water Inlet - Install - Engine Coolant Air Bleed Hose Replacement
Inspect the high voltage battery coolant level. High Voltage Battery Coolant Level Inspection
Courtesy of GENERAL MOTORS COMPANY

Rear Window Panel Trim (2) - Install - Rear Window Panel Trim Replacement (Without Platinum)Rear Window Panel Trim Replacement (With Platinum)
Enable the high voltage system. High Voltage Enabling
Start the engine and check for coolant leaks.