LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> CT6 Plug-In >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Diagnostic Information and Procedures >> DTC P30D2 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition - On / Vehicle - In Service Mode
  2. Verify DTC P30D2 is not set.
    • If the DTC is set 
    1. Replace the component: K20 Engine Control Module
    • Go to next step: If the DTC is not set 
  3. All OK.
scientia non olet · About LEMON Manuals