LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> CT6 Plug-In >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Image Display Camera Systems >> Diagnostic Information and Procedures >> Night Vision Camera System Malfunction >> Circuit/System Verification

Circuit/System Verification

    NOTE:

    Remove items from dash that may cover the Ambient Light Sensor

  1. Ignition ON.
  2. Verify there are no DTCs set in the K172 Night Vision Control Module.
    • Go to next step: If any DTC is not set 
  3. Perform the Reset Manufacturer Enable Counter with a scan tool.
    • If the Request Rejected by the Control Module message does not appear 

      Verify the Night Vision System operates normally.

    • Go to next step: If the Request Rejected by the Control Module message appears 
  4. Program the K172 Night Vision Control Module. Refer to Control Module References
  5. Verify the Night Vision System operates normally.
    • Go to next step: If Night Vision System operates normally 
  6. All OK.
scientia non olet · About LEMON Manuals