LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> XTS Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Replacement (LFX) >> Installation Procedure

Installation Procedure

    Fig 1: Starter Motor And Bolts
    GM2201749Courtesy of GENERAL MOTORS COMPANY
  1. Position the starter motor (2) to the engine block.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the starter motor mounting fasteners (1) and tighten to 58 N.m (43 lb ft).
    3. Fig 2: View Of Starter Solenoid, Engine Harness Connector & Battery Positive Nut
    GM2196014Courtesy of GENERAL MOTORS COMPANY
  3. Install the battery positive cable and engine harness connector to the starter and tighten the battery positive cable fastener (1) to 9 N.m (80 lb in).
  4. Install the engine harness connector to the starter solenoid.
  5. Connect the knock sensor connector.
  6. Install the front compartment air deflector. Refer to Front Compartment Air Deflector Replacement (Right)Front Compartment Air Deflector Replacement (Left) .
    7. Fig 3: View Of Starter & Heat Shield
    GM2196015Courtesy of GENERAL MOTORS COMPANY
  7. Install the starter heat shield (2) and tighten the fastener (1) to 5 N.m (44 lb in).
  8. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals