LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> XTS Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
    2. Fig 1: Battery Fuse Block Cover
    GM2531359Courtesy of GENERAL MOTORS COMPANY
  2. Open the battery fuse block cover (2) with the release tab (1).
    3. Fig 2: Battery Hold-Down Strap And Battery Fuse Block Cable Clamp Fastener
    GM2531290Courtesy of GENERAL MOTORS COMPANY
  3. Release the tabs and open the battery fuse block cover. Remove the battery positive cable fastener and cable, from the battery fuse block.
  4. Remove the battery fuse block cable clamp fastener (3) and the battery hold-down strap (4).
    5. Fig 3: Battery Fuse Block And Retainers
    GM2531289Courtesy of GENERAL MOTORS COMPANY
  5. Remove the battery fuse block (2) with the retainers (1) and set aside.
    6. Fig 4: Battery Retainer And Fastener
    GM2531287Courtesy of GENERAL MOTORS COMPANY
  6. Remove the battery retainer fastener (1) and the retainer (2).
  7. Disconnect the battery vent hose at the battery.
    8. Fig 5: Battery
    GM2531274Courtesy of GENERAL MOTORS COMPANY
  8. Remove the battery (1) from the engine compartment.
scientia non olet · About LEMON Manuals